spiral bevel gear
英 [ˈspaɪrəl ˈbevl ɡɪə(r)]
美 [ˈspaɪrəl ˈbevl ɡɪr]
网络 弯齿伞形齿轮; 螺旋伞齿轮; 蜗线斜齿轮; 曲线齿锥齿轮; 齿锥齿轮
双语例句
- The quenching distortion of rear axle spiral bevel gear used in FLAT tractor is studied in this paper.
研究了菲亚特拖拉机后桥大圆锥螺旋齿轮淬火变形规律，分析了原淬火压模存在的问题。 - The generating motion of the generating gear and the work gear on spiral bevel gear NC machining is analyzed.
分析了弧齿锥齿轮数控加工中产形轮和工件齿轮之间的展成运动，建立了弧齿锥齿轮齿面的数学模型。 - By proper selection of the spiral bevel gear modification coefficients, the load bearing capacity can be raised and the structures of the tooth surface can be improved.
通过变位系数的选择，改善了齿面结构，提高了弧齿锥齿轮的承载能力； - Application of Adaptive Acceleration-deceleration Control Method of Parametric Curve Interpolator in Spiral Bevel Gear NC Machining
参数曲线自适应加减速控制方法在弧齿锥齿轮数控加工中的应用 - Spiral Bevel Gear Rolling Test on Digital Image Acquisition and Processing
弧齿锥齿轮对滚检验数字图像采集与处理 - Research on Machining Simulation System of Phoenix ⅱ CNC Spiral Bevel Gear Grinding Machine
PhoenixⅡ螺旋锥齿轮磨齿机加工仿真系统的研究 - Intelligent Assembly and Dynamic Simulation Analysis of Spiral Bevel Gear
弧齿锥齿轮的智能装配和动态仿真分析 - When a spiral bevel gear is working, its tooth contact stress has direct effect on its service life and safety.
弧齿锥齿轮工作时齿面接触应力的大小直接影响其使用寿命和安全。 - Research on Influence of Machining Parameters of Generating Method on Tooth Surface of Spiral Bevel Gear
展成法加工参数对弧齿锥齿轮齿面的影响研究加工直伞齿轮的机床准双曲面齿轮加工机床 - Gleason spiral bevel gear cutter
格里森螺旋伞齿轮铣刀 - The fatigue life of spiral bevel gear can not directly use to estimate the fatigue life of transmission assembly.
不能直接用螺旋锥齿轮闭式试验台的疲劳试验结果估算变速箱总成中主动螺旋锥齿轮的疲劳强度和疲劳寿命。 - The system composition, frame model, running model and system reality of the network-based and concurrent engineering-oriented spiral bevel gear cooperative design system are discussed in this paper.
论文讨论了基于网络面向并行工程的螺旋锥齿轮协同设计系统的体系结构、框架模型、运行模式和系统实现，并就其中涉及到的主要关键技术进行了分析。 - Parameter Modeling and Finite Element Analysis for Final Drive Spiral Bevel Gear;
汽车主减速器螺旋锥齿轮参数化建模与有限元分析减速齿轮[器]，自动传动轮（二轮） - A direct interpolation algorithm of spiral bevel gear NC machining is proposed, thus establishing the relationship between tile motion of the cutter-head center and the rotation of the work gear.
提出了弧齿锥齿轮数控加工的直接插补算法，确定了铣齿刀盘中心运动和工件齿轮旋转运动之间的关系。 - Research on Surface Roughness for Multi-axis NC Grinding of Spiral Bevel Gear
多轴数控磨削螺旋锥齿轮的表面粗糙度研究 - The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.
给出了斜航式法向圆弧螺旋锥齿轮的参数化建模方法。 - Influence of bearing stiffness and backlash on bifurcation and chaotic of spiral bevel gear transmission system
支承刚度和啮合间隙变化时弧齿锥齿轮传动系统的分岔与混沌行为 - Research Status and Development Trends of Precision Forging Process for Spiral Bevel Gear
螺旋伞齿轮精锻工艺研究现状与发展趋势 - Research on the Influence of Adjustment Errors of Machine on Tooth Surfaces of Spiral Bevel Gear
机床调整误差对螺旋锥齿轮齿面影响的研究主动小齿轮锥形轴承 - Dynamic Analysis and Optimization of Spiral Bevel Gear System
螺旋锥齿轮系统动力分析及动态性能优化 - Study on Three-dimensional Virtual Simulation Machining of Double Circular Arc Profile Spiral Bevel Gear
自转中的双三棱锥&科学和宗教关系的完美架构双圆弧弧齿锥齿轮的三维虚拟仿真加工 - Control of Heat Treatment Distortion of Auto Rear Axle Spiral Bevel Gear
汽车后桥螺旋伞齿轮热处理畸变的控制 - Research of Spiral Bevel Gear Chamfering Equipment Based on 6-HTT Parallel Manipulator
基于6-HTT并联机器人的螺旋锥齿轮齿顶倒角设备研究 - The company is the domestic processing of the few large spiral bevel gear manufacturer one.
本公司是国内为数不多加工范围较大的弧齿锥齿轮制造厂家之一。 - Research on Generation Mechanism and Correction Technique for Spiral Bevel Gear's Grinding Errors
螺旋锥齿轮磨削误差产生机制及修正技术研究 - Influence analysis of structure parameters on spiral bevel gear precision forging
结构参数对弧齿锥齿轮精锻成形的影响分析 - Research on the Movement and Controlling of the Spiral Bevel Gear with Spherical Involute Profil Machining
球面渐开线齿形弧齿锥齿轮加工所需运动及控制研究 - These provide a foundation for the control of grinding quality of spiral bevel gear.
研究结果为螺旋锥齿轮磨齿质量的控制提供了依据。 - Spiral bevel gear design model study and system development
弧齿锥齿轮设计模型研究与系统开发